FS-Curtis Air Compressor Model 755VT8
For heavy-duty work requiring high air pressures, the FS-Curtis Air Compressor Model 755VT8 is worth checking out. This compressor is a two-stage, single-phase machine that is capable of a maximum pressure of 175 PSI. Air is stored in an upright hotdog tank with a capacity of 80 gallons. At its maximum pressure, it can deliver an airflow of 23.5 CFM.
The pump is constructed out of heavy-duty cast iron giving it superior durability and strength. It is a two-stage type which has two cylinders where air compressed in one is channeled to the second cylinder for further compression, allowing air pressure to reach high levels.
The valve system, made up of the inlet and discharge valves, consists of heavy-duty stainless steel. This results in improved airflow for each motor horsepower. Both the piston cylinder and valve head are provided with deep fins that maintain their durability while at the same time allowing a cooler operation. The crankshaft is made of ductile iron and is fitted with heavy-duty main roller bearings for a smooth performance.
The pump is driven by a 7.5-horsepower motor with a magnetic starter. It is a single-phase type with a voltage of 230 V. It is connected to the compressor pump via a V-belt drive with a slow and quiet design. This design, as it does not unduly tax the pump, results in an extended compressor life. A metal guard approved by the OSHA totally envelopes the belt for safety.
The FS-Curtis Air Compressor Model 755VT8 has dimensions of 36″ W x 25″ D x 73″ H. It is intended for a fixed installation and is actually equipped with provisions for its bolting into the floor or at least to a strong solid base.